LOWER INSTRUMENT PANEL > REASSEMBLY |
| 1. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY |
![]() |
Attach the 4 wire harness clamps to install the antenna cord.
| 2. INSTALL NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
![]() |
Attach the 4 wire harness clamps and rotate the lights in the direction shown in the illustration to install the interior illumination light.
| 3. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
![]() |
Attach the 2 claws to install the interior illumination light.
| 4. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR (for Automatic Air Conditioning System) |
![]() |
Attach the 2 claws to install the cooler thermistor.
| 5. INSTALL INSTRUMENT PANEL SAFETY PAD COVER (w/ Entry and Start System) |
![]() |
Attach the 4 claws to install the instrument panel safety pad cover.
| 6. INSTALL INSTRUMENT PANEL SAFETY PAD COVER (w/o Entry and Start System) |
![]() |
Attach the 4 claws to install the instrument panel safety pad cover.
| 7. INSTALL FUSE BOX OPENING COVER (for LHD) |
![]() |
Attach the 2 claws and 2 clips to install the cover.
| 8. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |