Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/ Entry and Start System)

DTC    B2791    Communication Condition Failure between ECM

for Preparation Click here


DESCRIPTION

This DTC is output when the ID code box does not respond to a verification request signal from the ECM.

DTC Code
DTC Detection Condition
Trouble Area
B2791
One of following conditions is met:
  1. Communication failure between ID code box and ECM
  2. Communication line malfunction
  3. ID code verification failure
  1. Wire harness
  2. ECU aggregation box (certification ECU)
  3. Instrument panel junction block (main body ECU)
  4. ID code box
  5. Steering lock actuator (steering lock ECU)
  6. ECM

INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTC (Click here).

  1. Recheck for the DTC.

    OK:
    B2791 and other DTC output do not reoccur.



OK
NORMAL
NG

GO TO DTC CHART