Home › ENGINE ยท 2GR-FE › EMISSION CONTROL › PURGE VALVE

PURGE VALVE > INSTALLATION

for Preparation Click here



1. INSTALL PURGE VSV


    A136127E01
  1. Install the purge VSV with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the 2 purge line hoses to the purge VSV.

  1. Connect the wire harness clamp.

  1. Connect the purge VSV connector.



2. INSTALL V-BANK COVER SUB-ASSEMBLY


    A137900
  1. Attach the 3 clips to install the engine cover.