Home › ENGINE ยท 2GR-FE › EMISSION CONTROL › PCV VALVE

PCV VALVE > INSTALLATION

for Preparation Click here



1. INSTALL VENTILATION VALVE SUB-ASSEMBLY


    A092670E03
  1. Apply adhesive to 2 or 3 threads of the ventilation valve.

    Adhesive:
    Toyota genuine adhesive 1324, three bond 1324 or equivalent



    A136117E01
  1. Using a 22 mm deep socket wrench, install the ventilation valve.

    Torque:
    27 N*m{ 275 kgf*cm , 20 ft.*lbf }



    A136116
  1. Connect the ventilation hose.



2. INSTALL V-BANK COVER SUB-ASSEMBLY


    A137900
  1. Attach the 3 clips to install the engine cover.



3. INSPECT FOR ENGINE OIL LEAK