AIR FUEL RATIO SENSOR > ON-VEHICLE INSPECTION |
| 1. CHECK AIR FUEL RATIO COMPENSATION SYSTEM |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Select the following menu items: Data List / AFS B1 S1, AFS B2 S1, O2S B1 S2 and O2S B2 S2.
Warm up the A/F sensor with the engine speed at 2500 rpm for approximately 2 minutes.
![]() |
Maintain the engine speed at 2500 rpm and confirm that the displays of "AFS B1 S1" and "AFS B2 S1" are as shown in the illustration.
Confirm that the displays of "O2S B1 S2" and "O2S B2 S2" change between 0 and 1 V with the engine speed at 2500 rpm.