Home › ENGINE ยท 2GR-FE › EMISSION CONTROL › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
(Click here)


2. REMOVE HEATED OXYGEN SENSOR (for Bank 1)


    A173718E01
  1. Disconnect the sensor connector.

  1. Using SST, remove the sensor from the exhaust pipe.

    SST
    09224-00010  



3. REMOVE HEATED OXYGEN SENSOR (for Bank 2)


    A174094E01
  1. Disconnect the sensor connector.

  1. Using SST, remove the sensor from the exhaust pipe.

    SST
    09224-00010