Home › ENGINE ยท 3ZR-FAE › EMISSION CONTROL › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
  1. Remove the rear console box sub-assembly (Click here).



2. REMOVE FRONT FLOOR COVER


    A209090
  1. Remove the nut, bolt, 3 clips and floor cover.



3. REMOVE HEATED OXYGEN SENSOR


A209827E01
  1. Disconnect the sensor connector.



    A209091E01
  1. Using SST, remove the sensor from the center exhaust pipe.

    SST
    09224-00010