OIL PUMP > INSPECTION |
| 1. INSPECT OIL PUMP RELIEF VALVE |
Coat the relief valve with engine oil and drop it into the relief valve hole.
![]() |
Check that the relief valve falls in smoothly by its own weight.
If it does not, replace the relief valve. If necessary, replace the timing chain cover.
| 2. INSPECT OIL PUMP ROTOR SET |
![]() |
Install the drive and driven rotors into the timing chain cover with the rotors' marks facing the cylinder block. Check that the rotors turn smoothly.
![]() |
Check the tip clearance.
Using a feeler gauge, measure the clearance between the drive rotor and driven rotor tips.
![]() |
Check the body clearance.
Using a feeler gauge, measure the clearance between the timing chain cover and driven rotor.
![]() |
Check the side clearance.
Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge.