Home › ENGINE ยท 2GR-FE › LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP COVER


    A131928E01
  1. Install the drive and driven rotors into the timing chain cover with the rotors' marks facing the cylinder block. Check that the rotors turn smoothly.



    A132057E01
  1. Install the oil pump cover with the 8 bolts.

    Torque:
    9.1 N*m{ 93 kgf*cm , 81 in.*lbf }

    HINT:
    Bolt length:
    22 mm (0.87 in.) for bolt A

    40 mm (1.58 in.) for bolt B



2. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the oil pump relief valve with engine oil.

  1. Install the relief valve and relief valve spring into the timing chain cover hole.



    A132097
  1. Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }