Home › ENGINE ยท 2GR-FE › LUBRICATION › OIL PUMP

OIL PUMP > REPLACEMENT

for Preparation Click here



1. REPLACE TIMING CHAIN COVER OIL SEAL


    A128007E03
  1. Using a screwdriver, pry out the oil seal.

    HINT:
    Tape the screwdriver tip before use.

    NOTICE:
    Do not damage the surface of the oil seal press fit hole.



    A132052E01
  1. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover edge.

    SST
    09316-60011   (09316-00011)

    NOTICE:
    1. Keep the lip free from foreign matter.
    2. Do not tap the oil seal at an angle.
    3. Make sure that the oil seal edge does not stick out of the timing chain case.

  1. Apply MP grease to the lip of the oil seal.