Home › TRANSMISSION ยท U151F AUTOMATIC TRANSAXLE › DIFFERENTIAL OIL SEAL

DIFFERENTIAL OIL SEAL > REPLACEMENT

for Preparation Click here



1. REMOVE TRANSFER ASSEMBLY

HINT:
(Click here)



2. REMOVE TRANSAXLE HOUSING OIL SEAL LH


    D025835E01
  1. Using SST, tap out the transaxle housing oil seal LH.

    SST
    09308-00010  



3. REMOVE TRANSAXLE HOUSING OIL SEAL RH


  1. Remove the transaxle housing oil seal RH (Outside).



      D025618E01
    1. Using a screwdriver with its tip wrapped with vinyl tape, pry out the oil seal.

      NOTICE:
      Be careful not to damage the housing.



  1. Remove the transaxle housing oil seal RH (Inside).



      C139837E02
    1. Using SST, tap out the oil seal.

      SST
      09308-00010  

      NOTICE:
      Be careful not to damage the differential case.



4. INSTALL TRANSAXLE HOUSING OIL SEAL LH
  1. Coat the lip of a new transaxle housing oil seal LH with MP grease.



    D025836E01
  1. Using SST and a hammer, tap in the oil seal.

    SST
    09223-15020  
    09950-70010   (09951-07200)

    Standard depth:
    -0.5 to 0.2 mm (-0.0196 to 0.00787 in.)

    NOTICE:
    Do not damage the lip of the oil seal.



5. INSTALL TRANSAXLE HOUSING OIL SEAL RH


    C188860E01
  1. Install the transaxle housing oil seal RH (Inside).

    1. Coat the lip of a new oil seal with MP grease.

    2. Using SST and a hammer, tap in the oil seal.

      SST
      09950-60010   (09951-00410)
      09950-70010   (09951-07200)

      Standard depth:
      27.5 to 28.5 mm (1.08 to 1.12 in.)

      NOTICE:
      Do not damage the lip of the oil seal.



    C188861E01
  1. Install the transaxle housing oil seal RH (Outside).

    1. Coat the lip of the oil seal with MP grease.

    2. Using SST and a hammer, tap in the oil seal.

      SST
      09649-17010  
      09950-70010   (09951-07200)

      Standard depth:
      5.5 to 6.5 mm (0.217 to 0.256 in.)

      NOTICE:
      Do not damage the lip of the oil seal.



6. INSTALL TRANSFER ASSEMBLY

HINT:
(Click here)