TRANSMISSION WIRE > INSTALLATION |
| 1. INSTALL TRANSMISSION WIRE |
![]() |
Coat a new O-ring of the transmission wire connector with ATF.
Install the O-ring to the transmission wire connector.
![]() |
Install the transmission wire.
Install the bolt.
Connect the connector.
![]() |
Coat the O-ring of the ATF temperature sensor with ATF.
Apply ATF to the bolt.
Install the ATF temperature sensor with the lock plate and bolt.
Connect the 7 shift solenoid valve connectors.
| 2. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
![]() |
Install the 2 magnets in the oil pan.
Apply adhesive to the 18 bolts.
![]() |
Install a new gasket and the oil pan with the 18 bolts.
| 3. INSTALL NO. 1 ENGINE UNDER COVER |
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. ADD AUTOMATIC TRANSAXLE FLUID |
| 6. INSPECT TRANSAXLE FLUID LEVEL |
Inspect the fluid level (Click here).