Home › TRANSMISSION ยท U140F AUTOMATIC TRANSAXLE › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


3. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
  1. Remove the console box (Click here).



4. DISCONNECT TRANSAXLE CONTROL CABLE ASSEMBLY


C130920
  1. Disconnect the control cable from the shift lever.



    C127813E01
  1. Turn the nut and disconnect the control cable from the shift lever retainer.



5. REMOVE FLOOR SHIFT ASSEMBLY


C127815
  1. Remove the 4 bolts and floor shift.



    C127814
  1. Disconnect the 2 connectors and detach the clamp.