Home › TRANSMISSION ยท U151F AUTOMATIC TRANSAXLE › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    C169080
  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



3. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
  1. Remove the rear console box sub-assembly (Click here).



4. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    C135091
  1. Disconnect the control cable from the shift lever.



    C127813E01
  1. Turn the lock nut counterclockwise. While holding the lock nut, disconnect the transmission control cable from the shift lever retainer.



5. REMOVE FLOOR SHIFT ASSEMBLY


    C127815
  1. Remove the 4 bolts and floor shift assembly.



    C127814
  1. Disconnect the 2 connectors and detach the clamp.