FLOOR SHIFT ASSEMBLY > REASSEMBLY |
| 1. INSTALL SHIFT LOCK RELEASE BUTTON |
![]() |
Install the spring and button and attach the claws to the position indicator light housing.
| 2. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
| 3. INSTALL POSITION INDICATOR LIGHT HOUSING |
![]() |
Attach the indicator light housing to the shift position indicator housing with the 2 claws.
| 4. INSTALL LOWER POSITION INDICATOR HOUSING |
![]() |
Install the position indicator slide cover with slide cover No. 2 to the indicator housing.
Attach the housing to the floor shift assembly with the 4 claws.