FLOOR SHIFT ASSEMBLY > REASSEMBLY |
| 1. INSTALL SHIFT LOCK RELEASE BUTTON |
![]() |
Install the spring and shift lock release button.
![]() |
Attach the claws to the position indicator light housing.
| 2. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
| 3. INSTALL POSITION INDICATOR LIGHT HOUSING |
![]() |
Install the indicator light housing and attach the 2 claws to the shift position indicator housing.
| 4. INSTALL LOWER POSITION INDICATOR HOUSING |
Install the position indicator slide cover with the No. 2 position indicator side cover to the indicator housing.
![]() |
Install the housing and attach the 4 claws to the floor shift assembly.