Home › TRANSMISSION ยท U241E AUTOMATIC TRANSAXLE › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL SHIFT LOCK RELEASE BUTTON


C127817
  1. Install the spring and button and attach the claws to the position indicator light housing.



2. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY


3. INSTALL POSITION INDICATOR LIGHT HOUSING


C127816
  1. Install the indicator light housing and the 2 claws to the shift position indicator housing.



4. INSTALL LOWER POSITION INDICATOR HOUSING


C127818
  1. Install the position indicator slide cover with slide cover No. 2 to the indicator housing.

  1. Install the housing and attach the 4 claws to the floor shift assembly.