Using a dial indicator, measure the direct clutch pack clearance while applying and releasing compressed air (392 kPa, 4.0 kgf/cm2, 57 psi).
- Standard pack clearance:
- 0.515 to 0.825 mm (0.0203 to 0.0324 in.)
If the pack clearance is less than the minimum, parts may have been assembled incorrectly, so check and reassemble again.
If the stroke is not as specified, select another flange.
- HINT:
- There are 6 flanges in different thickness.
- Standard flanges in different thickness:
No.
| Thickness
| No.
| Thickness
|
1
| 3.0 mm (.118 in.)
| 4
| 3.3 mm (0.130 in.)
|
2
| 3.1 mm (0.122 in.)
| 5
| 3.4 mm (0.134 in.)
|
3
| 3.2 mm (0.126 in.)
| 6
| 3.5 mm (0.138 in.)
|