Home › TRANSMISSION ยท U140F AUTOMATIC TRANSAXLE › SECOND BRAKE PISTON

SECOND BRAKE PISTON > REASSEMBLY

for Preparation Click here



1. INSTALL 2ND BRAKE PISTON O-RING


D003846E02
  1. Coat the 2 new O-rings with ATF, and install them into the 2nd brake piston.



2. INSTALL 2ND BRAKE PISTON


D003845E01
  1. Press in the 2nd brake piston into the 2nd brake cylinder with your hands.



3. INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY


D003843E02
  1. Install the piston return spring.



    D003796E04
  1. Place SST on the piston return spring, and compress the piston return spring with a press.

    SST
    09387-00060  

  1. Using a screwdriver, install the snap ring.

    NOTICE:
    Be sure the end gap of the snap ring is not aligned with the piston return spring claw.