Home › TRANSMISSION ยท U140F AUTOMATIC TRANSAXLE › UNDERDRIVE PLANETARY GEAR

UNDERDRIVE PLANETARY GEAR > INSPECTION

for Preparation Click here



1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD


D025593E02
  1. Using SST, fix the underdrive planetary gear.

    SST
    09387-00050  



    D025594E01
  1. Using SST and a torque wrench, measure the turning torque of the underdrive planetary gear in place while rotating the torque wrench at 60 rpm.

    SST
    09387-00050  

    Torque:
    Turning torque at 60 rpm:
    0.10 to 4.41 N*m{ 1.0 to 45 kgf*cm , 0.9 to 39 in.*lbf }

    HINT:
    Use a torque wrench with a fulcrum length of 160 mm (6.3 in.)