Home › TRANSMISSION ยท U151F AUTOMATIC TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL RING GEAR


    C126601E01
  1. Place matchmarks on the ring gear and differential case.



    C127422
  1. Remove the 14 bolts.



    C127423
  1. Using a plastic-faced hammer, tap on the ring gear to remove it from the case.



2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    D025595E02
  1. Using SST, tap out the front differential case front tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00500)



    D025596E02
  1. Using SST, remove the front differential case front tapered roller bearing outer race.

    SST
    09308-00010  



3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    C127825E01
  1. Using SST, remove the front differential case rear tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00500)



    D025598E01
  1. Using SST, tap out the front differential case rear tapered roller bearing outer race.

    SST
    09308-00010  



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    C050240E01
  1. Using a pin punch and hammer, remove the straight pin.

    NOTICE:
    Before removing the straight pin, unstake it with a pin punch.



5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT


    C127424
  1. Remove the front differential pinion shaft from the differential case.



6. REMOVE FRONT DIFFERENTIAL SIDE GEAR


    C050242E02
  1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.



7. REMOVE TRANSAXLE HOUSING OIL SEAL


    D025599E01
  1. Using SST and a hammer, tap out the oil seal.

    SST
    09950-70010   (09951-07100)
    09215-00013   (09215-00471)



8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL


    D025600E01
  1. Using SST and a hammer, tap out the oil seal.

    SST
    09950-70010   (09951-07100)
    09608-10010