Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B2793    Transponder Chip Malfunction

for Preparation Click here


DESCRIPTION

This DTC is output when: 1) during key code registration, a key malfunction occurs; 2) the key code was unable to be registered properly.

DTC Code
DTC Detection Condition
Trouble Area
B2793
Transponder chip malfunction
Key

INSPECTION PROCEDURE

1.REREGISTER KEY
  1. Clear the DTC (Click here).

  1. Reregister the key code with the transponder key ECU.

  1. Check that the engine starts with the key.

    OK:
    Engine starts.



NG
REPLACE KEY
OK

END