THEFT DETERRENT SYSTEM > SYSTEM DESCRIPTION |
| THEFT DETERRENT SYSTEM DESCRIPTION |
The theft deterrent system is designed to deter vehicle break-ins and theft. If an attempted break-in or theft is detected, horns will sound and the lights flash. The system uses the following cues to detect an attempted break-in or theft: 1) vehicle is forcibly entered, 2) the engine hood is forcibly opened, 3) the doors are unlocked without the use of a key, or 4) the cable from the negative (-) battery terminal is disconnected and reconnected.
If the system enters the alarm sounding state, any unlocked doors will automatically lock. The system has 4 states: disarmed state (1)/(2), arming preparation state, armed state and alarm sounding state.
| FUNCTION OF MAIN COMPONENT |
| Function | Outline |
| Security indicator light | Informs driver of theft deterrent system status |
| Theft warning siren | Sounds when attempted break-in or theft is detected |
| Hazard warning lights | Begins flashing when attempted break-in or theft is detected |
| Vehicle horn | Sounds when attempted break-in or theft is detected |
| Door courtesy light switches | Detects door open status (open or closed) |
| Door lock position switches | Detects door lock status (locked or unlocked) |
| Engine hood courtesy switch | Detects engine hood open status (open or closed) |
| Intrusion sensor | Detects intrusion |
| SYSTEM FUNCTION |
Disarmed state (1)/(2):
Arming preparation state:
Armed state:
Alarm sounding state: