DTC B2761 Intrusion Sensor Internal Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2761 | Intrusion sensor outputs signal for sensor malfunction |
|
| 1.CHECK FOR DTC |
Clear the DTC (Click here)
Set the theft deterrent system and check for a DTC.
|
| ||||
| NG | |
| 2.CHECK OVERHEAD JUNCTION BLOCK (OPERATION) |
Temporarily replace the overhead junction block (intrusion sensor) with a new or normally functioning one (Click here).
Check for a DTC.
|
| ||||
| OK | ||
| ||