Home › ENGINE ยท 2AZ-FE › ENGINE CONTROL SYSTEM › SFI SYSTEM

SFI SYSTEM > PRECAUTION

for Preparation Click here



1.INITIALIZATION

NOTICE:
Perform RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (Click here).

HINT:
Initialization cannot be completed by only removing the battery.


2.EXPRESSION OF IGNITION SWITCH

HINT:
The type of ignition switch used on this model differs according to the specifications of the vehicle.
The expressions listed in the table below are used in this section.

Expression
Ignition Switch (position)
Engine Switch (condition)
Ignition Switch off
LOCK
Off
Ignition Switch on (IG)
ON
On (IG)
Ignition Switch on (ACC)
ACC
On (ACC)
Engine Start
START
Start