Home › BODY ELECTRICAL › DOOR LOCK › TRANSMITTER BATTERY (w/ Entry and Start System)

TRANSMITTER BATTERY (w/ Entry and Start System) > REMOVAL

for Preparation Click here



1. REMOVE TRANSMITTER BATTERY


    B107849E04
  1. Push the release hook knob in the direction indicated by the arrow in the illustration. Pull the emergency key out of the transmitter.



    B107851E03
  1. Using a screwdriver, remove the transmitter cover.

    NOTICE:
    Do not forcibly pry the cover.

    HINT:
    Tape the screwdriver tip before use.



    B107853
  1. Remove the battery (lithium battery: CR1632).

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the battery. The terminals may be damaged.
    3. Do not touch the battery with wet hands. Water may cause rust.
    4. Do not touch or move any components inside the transmitter. It may interfere with proper operation.