Home › TRANSMISSION ยท U241E AUTOMATIC TRANSAXLE › SECOND BRAKE PISTON

SECOND BRAKE PISTON > REASSEMBLY

for Preparation Click here



1. INSTALL 2ND BRAKE PISTON O-RING


    C083465E01
  1. Coat 2 new O-rings with ATF and install them into the 2nd brake piston.



2. INSTALL 2ND BRAKE PISTON


    C083464E01
  1. Press in the 2nd brake piston into the 2nd brake cylinder with your hands.



3. INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY


    C083462E01
  1. Install the piston return spring.



    D003796E04
  1. Place SST on the piston return spring, and compress the piston return spring with a press.

    SST
    09387-00060  

  1. Using a screwdriver, install the snap ring.

    NOTICE:
    Be sure the end gap of the snap ring is not aligned with the piston return spring claw.