Home › TRANSMISSION ยท U241E AUTOMATIC TRANSAXLE › UNDERDRIVE PLANETARY GEAR

UNDERDRIVE PLANETARY GEAR > INSPECTION

for Preparation Click here



1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD


    D025594E02
  1. Using SST a torque wrench, measure the turning torque of the underdrive planetary gear assembly while rotating the torque wrench at 60 rpm.

    SST
    09387-00050  
    09564-16020  

    Torque:
    Standard turning torque at 60 rpm:
    0.23 to 5.01 N*m{ 2 to 51 kgf*cm , 2.0 to 44.3 in.*lbf }

    HINT:
    Use a torque wrench with a fulcrum length of 160 mm (6.3 in.).