REAR DOOR LOCK > INSPECTION |
| 1. INSPECT REAR DOOR WITH MOTOR LOCK ASSEMBLY LH |
for LHD, RHD (w/o Double Locking System):
![]() |
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 4 (L) Battery negative (-) → 1 (UL) | Lock |
| Battery positive (+) → 1 (UL) Battery negative (-) → 4 (L) | Unlock |
![]() |
for RHD (w/ Double Locking System):
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 2 (L) Battery negative (-) → 1 (UL) | Lock |
| Battery positive (+) → 1 (UL) Battery negative (-) → 2 (L) | Unlock |
| 2. INSPECT REAR DOOR WITH MOTOR LOCK ASSEMBLY RH |
for LHD, RHD (w/o Double Locking System):
![]() |
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 4 (L) Battery negative (-) → 1 (UL) | Lock |
| Battery positive (+) → 1 (UL) Battery negative (-) → 4 (L) | Unlock |
![]() |
for RHD (w/ Double Locking System):
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 4 (L) Battery negative (-) → 3 (UL) | Lock |
| Battery positive (+) → 3 (UL) Battery negative (-) → 4 (L) | Unlock |