Home › ENGINE · 1AZ-FE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > INSPECTION

for Preparation Click here



1. INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    A133069E01
  1. Measure the resistance of the sensor.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 (HA1A) - 2 (+B)
    1.8 to 3.4 Ω at 20°C (68°F)
    1 (HA1A) - 4 (A1A-)
    10 kΩ or higher

    If the resistance is not as specified, replace the sensor.