Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Air Conditioner 
Display
Default
Contents
Setting
Set Temperature Shift
Normal
Function to set the temperature shift.
+2 C/+1 C/Normal/-1 C/-2 C
Evaporator Control
Automatic
Function to set the evaporator control to the automatic position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up.
Automatic/Manual
Compressor/Air Inlet DEF operation
Link
Function to automatically turn the A/C on when the front defroster button is pressed.
Link/Normal
Compressor Mode
Automatic
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off.
Automatic/Manual
Air Inlet Mode
Automatic
Function to automatically change to recirculation mode when the A/C is turned on.
Automatic/Manual
Foot/DEF Auto Mode
ON
Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on.
ON/OFF
Foot/DEF Automatic Blow Up Function
ON
Function to change the blower level automatically when the front defroster is on.
ON/OFF