Home › ENGINE ยท 3ZR-FAE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT NO. 1 COOLING FAN MOTOR


    A207917
  1. Disconnect the No. 1 fan motor connector.

  1. Connect the battery and an ammeter to the No. 1 fan motor connector.

  1. Check that the No. 1 fan rotates smoothly, and then check the reading on the ammeter.

    Standard Current:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    5.5 to 7.5 A

    If the result is not as specified, replace the No. 1 cooling fan motor.

  1. Reconnect the No. 1 fan motor connector.



2. INSPECT NO. 2 COOLING FAN MOTOR


    A207918
  1. Disconnect the No. 2 fan motor connector.

  1. Connect the battery and an ammeter to the No. 2 fan motor connector.

  1. Check that the No. 2 fan rotates smoothly, and then check the reading on the ammeter.

    Standard Current:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    5.5 to 7.5 A

    If the result is not as specified, replace the No. 2 cooling fan motor.

  1. Reconnect the No. 2 fan motor connector.