Home › ENGINE ยท 2GR-FE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT NO. 1 COOLING FAN MOTOR


    A173389E01
  1. Connect the battery and an ammeter to the No. 1 cooling fan motor connector.

  1. Check that the fan rotates smoothly, and then check the reading on the ammeter.

    Standard amperage:
    Motor Type
    Condition
    Specified Condition
    240 W
    at 20°C (68°F)
    18.0 to 22.0 A

    HINT:
    Refer to the illustration for the indication mark location.

    If the result is not as specified, replace the No. 1 cooling fan motor.



2. INSPECT NO. 2 COOLING FAN MOTOR


    A138956E01
  1. Connect the battery and an ammeter to the No. 2 cooling fan motor connector.

  1. Check that the fan rotates smoothly, and then check the reading on the ammeter.

    Standard amperage:
    Motor Type
    Condition
    Specified Condition
    240 W
    at 20°C (68°F)
    18.0 to 22.0 A

    HINT:
    Refer to the illustration for the indication mark location.

    If the result is not as specified, replace the No. 2 cooling fan motor.