DOOR CONTROL RECEIVER (for Long Body) > INSTALLATION |
| 1. INSTALL DOOR CONTROL RECEIVER |
![]() |
Install the receiver with the bolt.
Connect the receiver connector.
| 2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH |
![]() |
Attach the 7 clips to install the garnish.
| 3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH |
![]() |
Install the belt hanger to the trim board.
Attach the 4 clips and 5 claws to install the trim board.
Install the 2 screws and 2 bolts.
![]() |
Connect the rear No.1 seat belt's floor anchor.
Connect the floor anchor with the bolt.
Install the anchor cover.
| 4. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY |
![]() |
Install the tether anchor bracket with the bolt.
| 5. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH |
![]() |
Attach the 6 claws to install the bezel.
| 6. INSTALL REAR FLOOR FINISH PLATE |
![]() |
Attach the 2 claws and 6 clips to install the finish plate.
| 7. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE |
![]() |
Attach the 7 clips to install the side plate.
Install the 4 screws.
| 8. INSTALL REAR FLOOR NO. 3 BOARD |
| 9. INSTALL REAR FLOOR NO. 2 BOARD |
| 10. INSTALL DECK BOARD ASSEMBLY |
| 11. INSTALL REAR FLOOR NO. 1 BOARD |
| 12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 13. INSTALL REAR DOOR SCUFF PLATE RH |
![]() |
Attach the 9 claws and 2 clips to install the scuff plate.