Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for HDD)

NAVIGATION SYSTEM (for HDD) > No Sound can be Heard from Speakers

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK AUDIO SETTINGS


    E179886E01
  1. Enter the sound adjustment screen by pressing the "SETUP" switch on the display panel.

  1. Set volume, fader, and balance to the initial values and check that the sound is normal.

    OK:
    Audio system returns to normal.

    HINT:
    Sound quality adjustment items vary depending on the type of amplifier.



NG
GO TO "Speaker Circuit" (Click here)
OK

END