SHIFT LEVER > REMOVAL |
| 1. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY |
Remove the rear console box (Click here).
| 2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
Move the shift lever to N.
![]() |
Disconnect the control cable from the shift lever.
![]() |
Pull out the stopper of the transmission control cable.
| *1 | Stopper |
| *2 | Nut |
Rotate the nut of the transmission control cable counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.
| 3. REMOVE FLOOR SHIFT ASSEMBLY |

Disconnect the 2 connectors and detach the 2 harness clamps.
Remove the 4 bolts and floor shift.