Home
›
STEERING
›
POWER STEERING
›
ELECTRONIC POWER STEERING SYSTEM
DTC C1554/23 Power Supply Relay Failure
for Preparation
Click here
DESCRIPTION
If the power steering ECU detects these DTCs, it shuts off the motor relay circuit (built into the power steering ECU) and stops power assist.
DTC No.
DTC Detection Condition
Trouble Area
C1554/23
Power source relay circuit malfunction
Power steering ECU
INSPECTION PROCEDURE
1.RECONFIRM DTC
Check for DTC.
OK:
DTC is not output.
OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
NG
REPLACE POWER STEERING ECU