Home › STEERING › POWER STEERING › ELECTRONIC POWER STEERING SYSTEM

DTC    C1528/12    Motor Rotation Angle Sensor Malfunction

for Preparation Click here


DESCRIPTION

The motor rotation angle sensor detects the motor rotation angle and sends this information to the power steering ECU.

DTC No.
DTC Detection Condition
Trouble Area
C1528/12
Motor rotation angle sensor malfunction
  1. Power steering motor
  2. Power steering ECU

WIRING DIAGRAM


C128934E02


INSPECTION PROCEDURE

1.CHECK CONNECTOR CONNECTION CONDITION
  1. Check the installation condition of the motor rotation angle sensor connector.

    OK:
    Motor rotation angle sensor connector is securely connected to the power steering ECU.

    Result 
    Result
    Proceed to
    NG
    A
    OK
    B



B
Go to step 3
A


2.RECONFIRM DTC
  1. Securely connect the motor rotation angle sensor connector.

  1. Check for DTC.

    OK:
    DTC is not output.

    Result 
    Result
    Proceed to
    DTC is output
    A
    DTC is not output
    B



B
END
A


3.READ VALUE USING INTELLIGENT TESTER (MOTOR ROTATION ANGLE SENSOR)
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG) and press the intelligent tester main switch ON.

  1. Select the items "Motor Rotation Angle" in the Data List and read the value displayed on the intelligent tester.

    Power steering ECU 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Reference Value
    Motor Rotation Angle
    Motor Rotation Angle:
    Min.: 0 deg
    Max.: 1441.77 deg
    Power steering in operation
    During steering operation, motor rotation angle value changes from 0 to 360°

    OK:
    During steering operation, motor rotation angle value changes from 0 to 360°.



NG
REPLACE POWER STEERING MOTOR
OK

REPLACE POWER STEERING ECU