DTC C1552/22 PIG Power Supply Voltage Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1552/22 | PIG power source circuit malfunction inside ECU |
|

| 1.READ VALUE USING INTELLIGENT TESTER (PIG POWER SUPPLY) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and press the intelligent tester main switch ON.
Select the item "PIG Power Supply" in the Data List and read the value displayed on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Specified Condition |
| PIG Power Supply | PIG power supply: Min.: 0 V Max.: 20.1531 V | Power steering in operation | 10 to 14 V |
|
| ||||
| NG | |
| 2.CHECK WIRE HARNESS (BATTERY - POWER STEERING ECU) |
![]() |
Disconnect the A2 ECU connector.
Measure the voltage of the wire harness side connector.
| Tester Connection | Specified Condition |
| A2-1 (PIG) - A2-2 (PGND) | 10 to 14 V |
|
| ||||
| OK | ||
| ||