Home › BRAKE › BRAKE CONTROL › VSC OFF SWITCH

VSC OFF SWITCH > INSPECTION

for Preparation Click here



1. CHECK TRACTION CONTROL SWITCH (VSC OFF SWITCH)


    C194196E04
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    6 (E) - 9 (+)
    Not pushed
    10 kΩ or higher
    Pushed
    Below 1 Ω

    If the result is not as specified, replace the traction control switch (VSC OFF switch).