Home › TRANSMISSION ยท U140F AUTOMATIC TRANSAXLE › TRANSMISSION OIL COOLER (w/ Warmer)

TRANSMISSION OIL COOLER (w/ Warmer) > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION OIL COOLER


C127831
  1. Install the oil cooler to the bracket with the 3 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



    C127830E01
  1. *1: Connect the No. 1 oil cooler outlet hose to the transmission.

  1. *2: Connect the No. 1 oil cooler inlet hose to the transmission.

  1. *3: Connect the No. 3 water by-pass hose to the transmission.

  1. *4: Connect the No. 4 water by-pass hose to the transmission.



2. ADD AUTOMATIC TRANSAXLE FLUID


3. INSPECT AUTOMATIC TRANSAXLE FLUID
  1. Inspect the automatic transaxle fluid (Click here).



4. ADD COOLANT
  1. Add the coolant .