NAVIGATION RECEIVER (for HDD) > INSTALLATION |
| 1. INSTALL NO. 2 RADIO BRACKET |
![]() |
Install the No. 2 radio bracket to the radio receiver with the 4 screws.
| 2. INSTALL NO. 1 RADIO BRACKET |
![]() |
Install the No. 1 radio bracket to the radio receiver with the 4 screws.
| 3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET |
Connect all connectors to install the navigation receiver.
Insert the navigation receiver to attach the 2 claws and 4 clips on its backside.
Install the 4 bolts.

| 4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() |
Connect the connector.
Attach the 3 clips and 2 claws to install the cluster finish panel.
| 5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() |
Connect the connector.
Attach the 3 clips and 2 claws to install the cluster finish panel.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |