SFI SYSTEM > Air Intake Control Circuit |


| 1.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (AICV VSV) |
![]() |
Turn the ignition switch to the ON position and turn the intelligent tester on.
Select the following menu items: Powertrain / Engine and ECT / Active Test / Activate VSV for AICS.
Check the operation of the VSV when the VSV is operated by the intelligent tester.
| Tester Operation | Specified Condition |
| VSV is ON | Air from port E flows out through port F |
| VSV is OFF | Air from port E flows out through the air filter |
|
| ||||
| NG | |
| 2.INSPECT AICV VSV |
Inspect the AICV VSV (Click here).
|
| ||||
| OK | |
| 3.INSPECT VACUUM TANK |
Inspect the vacuum tank .
|
| ||||
| OK | |
| 4.CHECK VACUUM PIPING (HOSE AND INTAKE MANIFOLD, VACUUM TANK) |
|
| ||||
| OK | ||
| ||