Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER SWITCH

HEADLIGHT CLEANER SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. w/ Navigation System (for HDD):
    After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.



2. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY


B133836
  1. Detach the 2 claws and remove the switch.