FRONT AXLE HUB > ON-VEHICLE INSPECTION |
| 1. REMOVE FRONT WHEEL |
| 2. REMOVE DISC BRAKE CYLINDER ASSEMBLY |
![]() |
Remove the 2 bolts and cylinder.
| 3. REMOVE FRONT DISC |
![]() |
Put matchmarks on the disc and axle hub.
Remove the disc.
| 4. CHECK FRONT AXLE HUB BEARING |
![]() |
Inspect the axle hub backlash.
Using a dial indicator, measure the backlash near the center of the axle hub.
Inspect the axle hub deviation.
Using a dial indicator, measure the deviation on the surface of the axle hub.
| 5. INSTALL FRONT DISC |
![]() |
Align the matchmarks and install the disc.
| 6. INSTALL DISC BRAKE CYLINDER ASSEMBLY |
![]() |
Install the cylinder with the 2 bolts.
| 7. INSTALL FRONT WHEEL |