REAR TRAILING ARM > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY |

Remove the cable clamp (labeled A) from the body.
Remove the casing cap bolt (labeled B) from the body.
Remove the clamp bolt (labeled C) from the body.
Remove the clamp bolt (labeled D) from the crossmember.
Remove the clamp bolt (labeled E) from the rear suspension crossmember.
Remove the clamp bolt (labeled F) from the trailing arm.
Disconnect the cable from the parking brake shoe lever and backing plate.
Disconnect the cable from the lever (Click here).
Remove the bolt and disconnect the cable from the backing plate.
| 3. REMOVE REAR TRAILING ARM ASSEMBLY LH |
![]() |
Remove the 3 bolts, nut and trailing arm from the axle carrier and suspension arm bracket.