Home
›
HEATER & AIR CONDITIONING SYSTEM
›
AIR CONDITIONING
›
PTC HEATER ASSEMBLY (for Cold Area)
PTC HEATER ASSEMBLY (for Cold Area) > INSPECTION
for Preparation
Click here
1. INSPECT PTC HEATER ASSEMBLY
Measure the resistance of the PTC heater assembly.
Standard resistance:
Tester Connection
Condition
Specified Condition
A-1 - B-1
Always
Below 1 kΩ
A-2 - B-1
A-2 - B-2
A-3 - B-2
If the result is not as specified, replace the PTC heater.