Home › BODY ELECTRICAL › AUDIO / VISUAL › STEERING PAD SWITCH

STEERING PAD SWITCH > INSPECTION

for Preparation Click here



1. INSPECT STEERING PAD SWITCH ASSEMBLY (except 3ZR-FAE)


  1. w/ Navigation System (for DVD):



    1. Measure the resistance according to the value(s) in the table below.


      B223663E01

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      10 (AU1) - 8(EAU)
      No switch is pushed
      95 to 105 kΩ
      Seek+ switch is pushed
      Below 2.5 Ω
      Seek- switch is pushed
      312 to 345 Ω
      Volume+ switch is pushed
      950 to 1050 Ω
      Volume- switch is pushed
      2954 to 3265Ω
      9 (AU2) - 8(EAU)
      No switch is pushed
      95 to 105 kΩ
      MODE switch is pushed
      Below 2.5 Ω
      On Hook switch is pushed
      321 to 345 Ω
      Off Hook switch is pushed
      950 to 1050 Ω
      Voice switch is pushed
      2954 to 3265 Ω

      If the result is not as specified, replace the steering pad switch assembly.



  1. w/ Navigation System (for HDD):



    1. Measure the resistance according to the value(s) in the table below.


      E166894E04

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      10 (AU1) - 8(EAU)
      No switch is pushed
      95 to 105 kΩ
      Seek+ switch is pushed
      Below 2.5 Ω
      Seek- switch is pushed
      312 to 345 Ω
      Volume+ switch is pushed
      950 to 1050 Ω
      Volume- switch is pushed
      2954 to 3265 Ω
      9 (AU2) - 8(EAU)
      No switch is pushed
      95 to 105 kΩ
      MODE switch is pushed
      Below 2.5 Ω
      On Hook switch is pushed
      312 to 345 Ω
      Off Hook switch is pushed
      950 to 1050 Ω
      Voice switch is pushed
      2954 to 3265 Ω
      7 (+DP) - 4(-DP)
      DISP switch is pushed
      Below 2.5 Ω

      If the result is not as specified, replace the steering pad switch assembly.



2. INSPECT STEERING PAD SWITCH ASSEMBLY (for 3ZR-FAE)


  1. Measure the resistance according to the value(s) in the table below.


    E179148E01

    Standard Resistance:
    w/o Bluetooth:
    Tester Connection
    Switch Condition
    Specified Condition
    7 (+DP) - 4(-DP)
    DISP switch is pushed
    Below 2.5 Ω

    w/ Bluetooth:
    Tester Connection
    Switch Condition
    Specified Condition
    10 (AU1) - 8(EAU)
    No switch is pushed
    95 to 105 kΩ
    Seek+ switch is pushed
    Below 2.5 Ω
    Seek- switch is pushed
    312 to 345 Ω
    Volume+ switch is pushed
    950 to 1050 Ω
    Volume- switch is pushed
    2954 to 3265 Ω
    9 (AU2) - 8(EAU)
    No switch is pushed
    95 to 105 kΩ
    MODE switch is pushed
    Below 2.5 Ω
    Voice switch is pushed
    2954 to 3265 Ω
    On Hook switch is pushed
    312.5 to 345.5 Ω
    Off Hook switch is pushed
    950 to 1050 Ω
    7 (+DP) - 4(-DP)
    DISP switch is pushed
    Below 2.5 Ω

    If the result is not as specified, replace the steering pad switch assembly.