Home › BODY ELECTRICAL › OTHER SYSTEM › CENTER POWER OUTLET SOCKET

CENTER POWER OUTLET SOCKET > INSTALLATION



1. INSTALL CENTER POWER OUTLET SOCKET ASSEMBLY


B110252
  1. Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.



2. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY


    B208374
  1. Connect the connectors.

  1. Attach the 4 clips to install the upper rear console panel.



3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)


    B216882
  1. Attach the 2 clips and 4 claws to install the upper console panel.



4. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)


    B208601
  1. Connect the connector.

  1. Attach the 2 clips and 4 claws to install the floor shift position indicator housing.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B216884
  1. for Manual Transaxle:
    Twist the shift lever knob in the direction indicated by the arrow to install it.



    B208596
  1. for Automatic Transaxle:
    Twist the shift lever knob in the direction indicated by the arrow to install it.



6. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH


    B208640
  1. Attach the 4 clips to install the upper panel garnish.



7. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH


    B208641
  1. Attach the 4 clips to install the upper panel garnish.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL