Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for LH Side)

REAR NO. 1 SEAT ASSEMBLY (for LH Side) > REMOVAL

for Preparation Click here



1. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY


2. REMOVE TONNEAU COVER ASSEMBLY


3. REMOVE REAR FLOOR NO. 1 BOARD


4. REMOVE DECK BOARD ASSEMBLY


5. REMOVE REAR FLOOR NO. 3 BOARD


6. REMOVE REAR FLOOR NO. 2 BOARD


7. REMOVE JACK CARRIER ASSEMBLY (for Short Body)


B129715
  1. Using a clip remover, remove the 7 clips and remove the jack carrier.



8. REMOVE REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE (for Short Body)


B129717
  1. Remove the 4 screws.

  1. Using a clip remover, detach the 7 clips and remove the plate.



9. REMOVE REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE (for Long Body)


B129705
  1. Remove the 4 screws.

  1. Using a clip remover, detach the 7 clips and remove the plate.



10. REMOVE BACK DOOR WEATHERSTRIP


11. REMOVE REAR FLOOR FINISH PLATE (for Short Body)


    B129716
  1. Using a clip remover, detach the 6 clips and remove the finish plate.



12. REMOVE REAR FLOOR FINISH PLATE (for Long Body)


B129704
  1. Using a clip remover, detach the 6 clips.

  1. Detach the 2 claws and remove the finish plate.



13. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH


    B132537
  1. Using a screwdriver, detach the 6 claws and remove the bezel.

    HINT:
    Tape the screwdriver tip before use.



14. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY (for Long Body)


    B135674
  1. Remove the bolt and tether anchor bracket.



15. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER (for Short Body)


B131613
  1. Using a screwdriver, detach the 4 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



16. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET (for Short Body)


    B130163
  1. Remove the bolt, 2 washers, collar and bracket.



17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for Short Body)


    B137546
  1. Disconnect the rear No. 1 seat belt's floor anchor.

    1. Remove the anchor cover.

    2. Remove the bolt and disconnect the floor anchor.



    B129712
  1. Remove the bolt and 2 screws.

  1. Using a screwdriver, detach the 5 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Using a clip remover, detach the 5 clips and remove the trim board.

  1. Disconnect the power outlet socket connector.

  1. Remove the belt hanger.



18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for Long Body)


    B137546
  1. Disconnect the rear No.1 seat outer belt's floor anchor.

    1. Remove the anchor cover.

    2. Remove the bolt and disconnect the floor anchor.



    B129706
  1. Remove the 2 screws and 2 bolts.

  1. Using a screwdriver, detach the 5 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Using a clip remover, detach the 4 clips and remove the trim board.

  1. Disconnect the power outlet socket connector.

  1. Remove the belt hanger.



19. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH


    B132538
  1. Remove the 2 bolts and lever.

  1. Disconnect the rear No. 1 seat lock cable from the lever.



20. REMOVE REAR NO. 5 SEAT LEG SIDE COVER


    B135841
  1. Using a screwdriver, detach the 3 claws and clip, and remove the side cover.

    HINT:
    Tape the screwdriver tip before use.



21. REMOVE REAR NO. 4 SEAT LEG SIDE COVER


    B132491
  1. Using a screwdriver, detach the 4 claws and remove the side cover.

    HINT:
    Tape the screwdriver tip before use.



22. REMOVE REAR NO. 3 SEAT LEG SIDE COVER


B131530
Using a screwdriver, detach the 4 claws and remove the side cover.

HINT:
Tape the screwdriver tip before use.



23. REMOVE REAR SEAT LEG COVER


    B131527E02
  1. Using a screwdriver, detach the 8 claws and remove the 2 leg covers.

    HINT:
    Tape the screwdriver tip before use.



24. REMOVE REAR SEAT LAP TYPE BELT ASSEMBLY CENTER RH


B138225
  1. Remove the bolt and the seat belt.



25. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY


  1. Disconnect the lock cable from the seat.



    1. Raise the adjuster's lock piece to release the lock.


      B140563E01



    2. B140557E01
    3. Slide the seat forward and tilt the seatback forward.



    4. B140558E01
    5. Remove the seat's cap from the connector case.



    6. B140560E01
    7. Pull the seat's cap toward the outside of the vehicle. Then remove the cable from the connector case's slit.



    8. B140562E01
    9. Remove the body's cap from the connector case.



  1. Detach the clamps and remove the lock cable.


    B132539E01



26. REMOVE REAR NO. 1 SEAT ASSEMBLY LH
  1. Lift up the seat track adjusting handle and move the seat to the rearmost position.



    B131536
  1. Remove the 2 bolts on the front side of the seat.

  1. Lift up the seat track adjusting handle and move the seat to the foremost position.



    B135840
  1. Remove the 3 bolts on the rear side of the seat.

  1. Fully tilt the seatback forward. Then remove the seat.

    NOTICE:
    Be careful not to damage the vehicle body,